Ethernet Fabric (VDX, CNA)

Reply
Occasional Contributor
Posts: 9
Registered: ‎10-26-2011

VDX with NOS 5.0.1 - Outbound access from in-band IP

So, I worked out the in-band management with NOS 5.0.1 using the management VRF and I can now ping, SNMP, & SSH to me VE interface addresses.  The issue I have now is that from the switch I don't appear to have any outbound access which means I cannot get to any NTP servers.  I have a default route configured (which must be working as I'm accessing the device from a different subnet.  This is what I get when I try to get to any address (including the next hop address) from the switch:-

 

 

NR_E3_Brocade101_RB01# ping 8.8.8.8
Type Control-c to abort
PING 8.8.8.8 (8.8.8.8): 56 data bytes
ping: sendto: Network is unreachable
ping: sendto: Network is unreachable
ping: sendto: Network is unreachable
ping: sendto: Network is unreachable
ping: sendto: Network is unreachable
--- 8.8.8.8 ping statistics ---
5 packets transmitted, 0 packets received, 100% packet loss

 

NR_E3_Brocade101_RB01# ping 8.8.8.8 source <VE Interface Address>
Type Control-c to abort
bind source address:: Cannot assign requested address


NR_E3_Brocade101_RB01# show ip route
Total number of IP routes: 0

 

The only issue this is causing me at the moment is getting NTP working which is not a major issue but it is annoying.

Join the Community

Get quick and easy access to valuable resource designed to help you manage your Brocade Network.