Ethernet Fabric (VDX, CNA)

Reply
Highlighted
New Contributor
Posts: 2
Registered: ‎03-30-2017
Accepted Solution

Configure port range VDX 6740

Hi, I can't seem to figure out how to configure multiple ports on my 6740's from different rbridges. 

 

This is what I think should work, but doesn't.  

vdx1(config)# interface TenGigabitEthernet 1/0/3 ten 2/0/3

% Invalid input detected at '^' marker.

vdx1(config)# interface TenGigabitEthernet 1/0/3, ten 2/0/3

% Invalid input detected at '^' marker.

vdx1(config)# interface TenGigabitEthernet 1/0/3,2/0/3

% Invalid input detected at '^' marker.

etc

 

What is the correct way?

 

Thanks!

Brad

Brocade Moderator
Posts: 228
Registered: ‎06-30-2010

Re: Configure port range VDX 6740

Hi Brad,

 

The syntax for interface range on VDX is as follows:

 

vdx1(config)# interface TenGigabitEthernet 1/0/3,4

vdx1(config)# interface TenGigabitEthernet 1/0/3-4

etc.

 

It is not possible for the range command to span Rbridge or Slot only ports on same Rbridge and Slot

 

Hope this makes sense

 

Regards

Mick


If my response has solved your query please click the "Accept as Solution" button.

Any and all information provided by me is not reviewed, approved or endorsed by Brocade and is provided solely as a convenience for Brocade customers.

All systems and all networks are different and unique. If you have a service affecting network problem, please open a TAC service request for service through Brocade, or through your OEM equipment provider.
New Contributor
Posts: 2
Registered: ‎03-30-2017

Re: Configure port range VDX 6740

Makes sense, thank you.

Join the Community

Get quick and easy access to valuable resource designed to help you manage your Brocade Network.