Application Delivery (ADX)

Reply
New Contributor
Posts: 4
Registered: ‎12-29-2016

hi.. can any one guide me how to configure NTP server on ADX-4000email me :shaukat@ntspl.net

Hi ,

i wan to configuer ntp server on ADX-4000

SSH@LHR-GDT-SLB-ADX4K-2(config)#show version
Copyright (c) 1996-2009 Brocade Communications Systems, Inc.
Boot Version 12.5.00T405 Aug 14 2012 11:09:42 PDT label: dob12500
Monitor Version 12.5.00T405 Aug 14 2012 11:09:42 PDT label: dob12500
System Version 12.5.02kT403 Oct 5 2016 21:06:59 PDT label: ASR12502k
AXP Version: 2.01 Dated: 2013/02/28 15:13:07
PAX Version: 8.7 Dated: 2012/02/28 17:04:52
MBRIDGE Version: 000b, Device ID # bebe
SSL XAP1 Version: 0.00 Dated: 2009/08/31 17:20:55
Backplane: ServerIron ADX 4000, Serial #: M00505M1AS
Chassis: ServerIron ADX 4000, Serial #: D72514M007
LID #: fMHKGJoFFM License: SI-4000-PREM
Multi-tenancy: Disabled

==========================================================================
SL slot-lc1: Line Card 12x1G Fiber
Serial #: E80341L007
Part #: 60-1001763-03
Version #: 13b626-05050505
==========================================================================
SL slot-mp: ServerIron Management Mod, ACTIVE
Serial #: E40313J00M
Part #: 60-1001841-03
SSL Card1 - Serial#: 1G0319J00D Part #: 40-1000374-02
==========================================================================
SL slot-sf: ServerIron Switch Fabric Mod
Serial #: E60304M00D
Part #: 60-1001650-02
Version #: 111d8037-00-111d802d-0d-11b720
==========================================================================
SL slot-asm1: ServerIron 8BP App Switch Mod
Serial #: E50344K011
Part #: 60-1001649-03
ASM-LID #: gKFIJJmFGG
Version #: 111d8037-00
Application Processors: 8
==========================================================================
Active management module:
1499 MHz Power PC processor (SVR 2.2, PVR 8021/0030) 599 MHz bus
512 KB Boot flash
131072 KB Code flash
4096 MB DRAM
The system uptime is 9 days 17 hours 12 minutes 47 seconds
The system started at 17:50:42, GMT-03, Tue Dec 20 2016

The system - boot source: secondary, mode: warm start, soft reset, total resets:17
SSH@LHR-GDT-SLB-ADX4K-2(config)#

TAC Mod
Posts: 96
Registered: ‎04-07-2011

Re: hi.. can any one guide me how to configure NTP server on ADX-4000email me :shaukat@ntspl.net

Hello @shaukat

 

Please see the attached ADX Admin Guide. The following excerpt from the Guide should help you:

 

Configuring SNTP
Simple Network Time Protocol (SNTP) ensures all devices have a synchronized time and date. If the ServerIronADX is configured to reference an authoritative SNTP server, the ServerIronADX automatically sets its system time counter according to the server (even after a system reset). Refer to RFC 1769 for more information. Refer to the show clock command to display the current
settings.


Configuring an SNTP server location
You can define the SNTP server’s location and specify an IP address or hostname. You can configure up to three SNTP servers by entering three separate sntp server commands. To configure an SNTP server location, enter a command such as the following:


ServerIronADX(config)#sntp server 10.1.1.1
Syntax: [no] sntp server ip-addr | hostname [version]


The version variable specifies the SNTP version the server is running and can be from 1 – 4. The default is 1.

 

Hopefully this helps; if we may further assist via the Community, please let us know.

 

Regards,

 

Denise K.

Brocade Community Team

@DeniseK

Occasional Contributor
Posts: 9
Registered: ‎01-18-2012

Re: hi.. can any one guide me how to configure NTP server on ADX-4000email me :shaukat@ntspl.net

Why won't this work on a Multi-Tenant MASTER?

TAC Mod
Posts: 96
Registered: ‎04-07-2011

Re: hi.. can any one guide me how to configure NTP server on ADX-4000email me :shaukat@ntspl.net

Hello @robert.daas

 

While we still encourage the community to assist with your post, we noticed you have a TAC case open regarding this issue. While engaged and working on a resolution with TAC Support, please continue to communicate directly with your TAC Support Engineer to avoid any private, customer-specific information from being posted to the Community.

Once your case is closed, if appropriate, we will post the resolution to this thread to help others within the Community; or, if you'd prefer, please come back and post the resolution yourself.

Please let us know if there is anything else we can do to help faciliate your case resolution.

Best Regards,

Denise K.
Brocade Community Team
@DeniseK

Join the Community

Get quick and easy access to valuable resource designed to help you manage your Brocade Network.