Application Delivery (ADX)

Reply
External Moderator
Posts: 4,907
Registered: ‎02-23-2004

Re: HELP!! ADX LOST PORT MANAGEMENT

[ Edited ]

Stupid question, are you using Router or Switch Image Code ?

TechHelp24
Occasional Contributor
Posts: 14
Registered: ‎03-17-2016

Re: HELP!! ADX LOST PORT MANAGEMENT

Switch and my question is i upload the router ?

External Moderator
Posts: 4,907
Registered: ‎02-23-2004

Re: HELP!! ADX LOST PORT MANAGEMENT

->Switch and my question is i upload the router ?

 

i think you have loaded the Router Code

 

ip route command, is not available on ADX with Router Code.

the command can executed on switch code only.

for this reason you get back "Unrecognized command"

TechHelp24
Occasional Contributor
Posts: 14
Registered: ‎03-17-2016

Re: HELP!! ADX LOST PORT MANAGEMENT

ok 

 

I upload the version switch, and you say witch the command works i need upload the router version?

External Moderator
Posts: 4,907
Registered: ‎02-23-2004

Re: HELP!! ADX LOST PORT MANAGEMENT

No, i don't say you need to upload the Route Code.

 

again,

 

ip route command is available on switch code only.

 

can you please post the entire output from command

 

#show version

TechHelp24
External Moderator
Posts: 4,907
Registered: ‎02-23-2004

Re: HELP!! ADX LOST PORT MANAGEMENT

Mrecinos,

 

if switch code is loaded,

 

i note follow in you post:

 

->SSH@GDA-ADX-PORTAL-B#show ip route

 

you must lauch the command as mentioned yesterday in my other post from #config level, in example

 

#config-if-mgmt-1)# ip route 

TechHelp24
Occasional Contributor
Posts: 14
Registered: ‎03-17-2016

Re: HELP!! ADX LOST PORT MANAGEMENT

SSH@GDA-ADX-PORTAL-B#show version
Copyright (c) 1996-2009 Brocade Communications Systems, Inc.
Boot Version 12.5.00T405 Aug 14 2012 11:09:42 PDT label: dob12500
Monitor Version 12.5.00T405 Aug 14 2012 11:09:42 PDT label: dob12500
System Version 12.5.02fT401 Dec 30 2015 19:09:34 PST label: ASM12502f
AXP Version: 2.01 Dated: 2013/02/28 15:13:07
PAX Version: 8.7 Dated: 2012/02/28 17:04:52
MBRIDGE Version: 000b, Device ID # bebe

==========================================================================
Type: ServerIron ADX 1016-4-PREM
Backplane Serial #: E20512G5KW
Chassis Serial #: E30542G00A
LID #: gIFKJHiFFc License: SI-1016-4-SSL-PREM
Multi-tenancy: Disabled
Part #: 35723-002
SSL Card - Serial #: 1F0508G14P Part #: 40-1000373-02
Version #: 13b626-05050505-111d8036-00
==========================================================================
Active management module:
1499 MHz Power PC processor (SVR 2.1, PVR 8021/0030) 599 MHz bus
512 KB Boot flash
131072 KB Code flash
2048 MB DRAM
The system uptime is 4 days 14 hours 53 minutes 1 seconds
The system started at 23:11:58, GMT-06, Wed May 25 2016

Occasional Contributor
Posts: 14
Registered: ‎03-17-2016

Re: HELP!! ADX LOST PORT MANAGEMENT

SSH@GDA-ADX-PORTAL-B(config)#ip route
Unrecognized command

External Moderator
Posts: 4,907
Registered: ‎02-23-2004

Re: HELP!! ADX LOST PORT MANAGEMENT

Configuring an IP route over the management port
You can configure up to 32 static routes over the management port. On switch code, in order to
configure an IP static route on the management port with a destination address of 10.0.0.0
255.0.0.0 and a next-hop router IP address of 10.1.1.1, enter the following commands.
ServerIronADX#configure terminal
ServerIronADX(config)#interface management 1
ServerIronADX(config-if-mgmt-1)#ip route 10.0.0.0 255.0.0.0 10.1.1.1

TechHelp24
External Moderator
Posts: 4,907
Registered: ‎02-23-2004

Re: HELP!! ADX LOST PORT MANAGEMENT

You are NOT on Router Code, you are in switch code, so the command is not working.

 

 

On router code, in order to configure an IP static route on the management port with a destination
address of 10.0.0.0 255.0.0.0 and a next-hop router IP address of 10.1.1.1, enter the following
commands.
ServerIronADX#configure terminal
ServerIronADX(config)#ip route 10.0.0.0 255.0.0.0 10.1.1.1

TechHelp24

Join the Community

Get quick and easy access to valuable resource designed to help you manage your Brocade Network.