Application Delivery (ADX)

Reply
Contributor
Posts: 35
Registered: ‎05-04-2009

SNMP OID for ServerIron CPU util (JetCore)?

Hi all,

what is the OID I have to use to get the CPU util of JetCore ServerIrons (<= TrafficWorks 11.0)? I do have a SI 450 with a WSM6 in but this Q should be the same for 350s/850s/GT-Cs/GT-Es and the 4Gs.

Thx.

Super Contributor
Posts: 316
Registered: ‎05-01-2009

Re: SNMP OID for ServerIron CPU util (JetCore)?

This should help:

OID: fdry.1.1.2.11.1.1.4.x.y.z

x = Slot of the CPU blade you would like to monitor (WSM)
y = the CPU ID (1 for the MP of the WSM, 2 for the first BP, 3 for the second BP and 4 for the third BP)
z = the average value you would like to get (1 for the last second, 5 for the last five second, 60 for the last minute and 300 for the last five minutes)

Pretty simple.

Contributor
Posts: 35
Registered: ‎05-04-2009

Re: SNMP OID for ServerIron CPU util (JetCore)?

What happens in case I add a second WSM to the system?

Super Contributor
Posts: 316
Registered: ‎05-01-2009

Re: SNMP OID for ServerIron CPU util (JetCore)?

Adding another WSM is going to result in a second slot being occupied by a WSM - the new WSM is going to offer additional processors and you do have to monitor them on top of the already existing processors.

Assuming you do have two WSM6 module you will have to monitor the load of 6 BPs and 2 MPs.

Join the Community

Get quick and easy access to valuable resource designed to help you manage your Brocade Network.