Application Delivery (ADX)

Reply
Occasional Contributor
Posts: 12
Registered: ‎05-27-2011

Problem with ADX and connection

HI,

In Adx Server Iron 1000, i create a virtual server and twelve real server with port 3389 and configure load balancing predictor: "Dynamic weighted reverse". The cluster and balancing work fine but i have a problem connect with after a while. After two hours of inactivity, the RDP client close. I check the real server configuration and is fine.


Have the ADX any config about the time of the session in the cluster?


Thanks


Nicolas

Frequent Contributor
Posts: 118
Registered: ‎06-15-2009

Re: Problem with ADX and connection

Moved to 'Application Delivery ' forum

thanks,

Deepti

Occasional Contributor
Posts: 12
Registered: ‎05-27-2011

Re: Problem with ADX and connection

Thanks and sorry

Contributor
Posts: 24
Registered: ‎11-03-2010

Re: Problem with ADX and connection

Hi, look for 'port profile tcp age' . What you need is to define under port 3389 a 'tcp 60 10' what configures the TCP age to 60 mins * 10 = 10 hours of idle timeout.

server port 3389

   tcp 60 10

-Alex

Occasional Contributor
Posts: 12
Registered: ‎05-27-2011

Re: Problem with ADX and connection

Alex, i check this config in ADX

Thanks!

Occasional Contributor
Posts: 12
Registered: ‎05-27-2011

Re: Problem with ADX and connection

Hi Ale, sorry for my late reply but I had no time to do the tests before.


I change the "tcp age" like you said but the the problem continues.


The profile of 3389 is:

server port 3389

tcp

tcp 60 3

but then 1 hour 40min the connection is still cutting


Thanks

Join the Community

Get quick and easy access to valuable resource designed to help you manage your Brocade Network.