Application Delivery (ADX)

Reply
New Member
Posts: 1
Registered: ‎06-16-2014

Peak 100 B0GMR WSM2 Card serveriron

hi everybody, 

 

The last week we have serious problems with a serveriron in a remote location, the model of device is ServerIron GT E-1, more details below

 

SLB-sw1# show version
SW: Version 09.3.01fTD2 Copyright (c) 1996-2003 Foundry Networks, Inc.
Compiled on Oct 18 2005 at 18:35:06 labeled as WXM09301f
(3771816 bytes) from Secondary WXM09301f.bin
HW: ServerIronGT E-1 Switch, SYSIF version 21, Serial #: Non-exist
==========================================================================
SL 1: B0GMR WSM2 Management Module, SYSIF 2, M6, ACTIVE
Serial #: CH14060448
0 MB SHM, 1 Application Processors
16384 KB BRAM, SMC version 5, BM version 21
SW: (1)09.3.01fTF2
========================================================================

SL 8: B0GMR WSM2 Management Module, SYSIF 2, M6, STANDBY
Serial #: CH25050036
0 MB SHM, 1 Application Processors
16384 KB BRAM, SMC version 5, BM version 21
SW: (1)09.3.01fTF2
==========================================================================

 

The problem was the controllers reaching the 100 of their ( B0GMR WSM2), when i  runned the command show cpu-utilization it showed my that both controllers was at 100% something like this

 

WSP1/1 peak: 100%, last sec: 83%
WSP8/1 peak: 100%, last sec: 78%

 

 

When a spoke with the ISP they said to me that we was receving 2 Gbps from internet over that interfaces (maybe kind of ddos).

 

I have some questions:

 

1. Maybe is a bug in the controllers?

2. maybe a bad configuration

3. Or just the controllers reached their maximux capacity

 

Please if you need mor information from sw, let me know.

 

 

Thanks

 

best regards.

 

 

Join the Community

Get quick and easy access to valuable resource designed to help you manage your Brocade Network.