Application Delivery (ADX)

Reply
Occasional Contributor
Posts: 17
Registered: ‎11-10-2010

Hardware specification for SI-1008-1, SI-1016-2 and SI-1016-4

I'm looking for hardware specification for SI-1008-1, SI-1016-2 and SI-1016-4. In datasheet mentions only maximum performance by ADX1000, ADX4000 and ADX10000 but nowhere mentions ADX1000 by enabled license. There are only a few information I got from Admin Guide like below:

  • SI-1008-1 group is 1 Application Core with 2GB memory
  • SI-1016-2 group is 2 Application Cores with 4GB memory
  • SI-1016-4 group is 4 Application Cores with 8GB memory

However, nowhere in Brocade document mentions other parameters such as L4/7 Transaction/Sec, SSL Transaction etc. Do you guys have some information about this? I really need your help -_-"

Thank you so much

Tony

Super Contributor
Posts: 1,087
Registered: ‎12-13-2009

Re: Hardware specification for SI-1008-1, SI-1016-2 and SI-1016-4

Hi Tony,

     below is from the Capacity on Demand with Brocade ServerIron ADX License Activation document from the Brocade site fround here

http://www.brocade.com/forms/getFile?p=documents/at_a_glance/SI_ADX_12.2_COD_GA-AG.pdf

ADX 1000 specs.png

Hope that help mate.

Michael.

Occasional Contributor
Posts: 17
Registered: ‎11-10-2010

Re: Hardware specification for SI-1008-1, SI-1016-2 and SI-1016-4

Hi Michale,

Thank you so much. It's very helpful document. : )

Best Regards,

Tony

Join the Community

Get quick and easy access to valuable resource designed to help you manage your Brocade Network.