Loading...
Hi, When you get the results back and xls workbook is attached. On the "introduction" tab there's a legend for the colors meaning. There's link as well to the sanhealth page with instruction…
SAN Health UtilityWhere is this place located?
Log in to follow, share, and participate in this community.
PortPerfShow is a full-duplex stat so it is combining ingress and egress on the port at the same time. Therefore an 8GB port could have up to 1600 MB. 1063 is 66% of the total throughput available…
HTTPS uses port TCP port 443. Also, please update to SAN Health 3.2.5 at http://brocade.com/sanhealth to ensure compatibility with all your switches.
Hi James, If this is a Brocade FOS switch you can use switchShow to see output that contains, among other things, the switchType.
SAN Health currently supports Brocade B-Series, M-Series (McData) and Cisco MDS switches. However, we would be interested in gauging the degree of interest in support for other vendors. If support…
This table shows the products that various versions of SAN Health support. You can always get the latest version of SAN Health at http://brocade.com/sanhealth. If you have any questions about this…
